| ||||||||||
|
|
Model PQ4LN01,5,10-D Precision Split Current Transformers Low Input Amps with Low Voltage Output 0.4" Window:
Ø Accuracy 0.5% Ø Phase Shift <60' Typical Ø Removable Leg - Easy To Install Ø 1A, 5A, 10A Ranges Ø Wide Bandwidth 50Hz to 1KHz Ø Excellent Low Current Sensitivity Ø ETL Recognized per UL506 Ø Comes with D-BMI TR type connector
PQ4LN is an indoor type CT. An internal voltage setting resistor sets the full scale output voltage to 1500 mV to be compatible with D-BMI instruments- this resistor also provides open circuit shock protection. The removable leg contains a lapped spring loaded core that mates with the precision core in the main housing. The phase displacement is adjusted to be within +/-60'.
Input Current: 50/60Hz sinewave or distorted sinewave, single phase Power Factor: Any load power factor from 0.5 to 1.0 either lead or lag Voltage Rating: 600VAC -- tested per UL506 Interface Impedance: Minimum of 100,000 Ohms resistive (negligible loading) Output: 1500 Millivolts AC for full scale 1,5,10 amps Ratio/Linearity Accuracy: 0.5% <0.1% available on special order> Phase Displacement or Shift: 60' or less @ 50/60Hz Phase Connection Relationship: White wire positive with arrow towards source Bandwidth: 50Hz to > 1KHz within 3db Temperature Affects: Less than 0.05% deviation in output voltage from -20ºC TO +50ºC Construction: Plastic ABS/PVC UL94-VO ; removable leg uses 2 knurled nylon screws. Twisted pair of leads 2 meters long to D-BMI TR connector. Compatible with new portables and 61000 instruments.
PQ4LN01-D 10 ma to 1000 ma over range to 5 amps PQ4LN05-D 100 ma to 5.0 a over range to 25 amps PQ4LN10-D 100 ma to 10 a over range to 200 amps
Order from : info@powerquality.org Power Quality Inc, 642 E 39th Placs, #5 Yuma, AZ 85365 1-928-344-9008 fax 1-928-344-8847
|
|
